XLPE BW PVC Cable AS/NZS 5000.1
Application
XLPE (Cross-Linked Polyethylene) insulated BW PVC low voltage Electric cables conforming to the AS/NZS 5000.1 standard are suitable for residential, commercial, and industrial electrical installations, widely in fixed wiring installations, including power distribution in buildings, industrial plants, and similar environments. For use in mains, sub-mains, and sub-circuits were enclosed in conduit, buried directly, or in underground ducts for buildings and industrial plants where not subject to mechanical damage.
Typical Cable Construction
- Conductor: Plain annealed copper
- Insulation: XLPE X-90 (Cross-linked polyethylene)
- Outer Sheath: PVC 5V-90 (Polyvinyl Chloride)
Characteristics
- Voltage Rate: Uo/U 0.6/1kV
- Maximum operating temperature: +90℃
- Type: Unarmoured or Armoured SWA (Galvanised Steel Wire Armour)
RELATED PRODUCTS
TUV Photovoltaic Solar Wire Cable PV1-F 2 PfG 1169
This product is suitable for single core soft cables on the DC side of photovoltaic systems with a maximum allowed DC voltage of up to 1.8kV (core-to-core, non-grounded system). Besides, It’s also suitable for use under Class II safety level. Temperature can reach 90℃, and multiple wires can be used in parallel.