Silicon Rubber Insulated Power Cable 0.6/1kV

Silicon Rubber Insulated Power Cable 0.6/1kV for power transmission under the environment of high temperature or cable between movable electrical instruments

Application
This product applies for power transmission under the environment of high temperature or cable between movable electrical instruments of rated voltage up to and including 0.6/1kV, The product has the characteristics of high temperature and low temperature resistant, acid and alkali resistant, corrosive gas resistant, flexible structure and so on. Thus it is widely used in metallurgy, electric power, petrochemical, electronics and automobile industry etc.

Executive Standard
Q/WHY 03

Service Property
1. The rated voltage U0/U of the cable should be 0.6/lkV.
2. Allowed long-term operating temperature of cable conductor should be 180℃.
3. Cable laying temperature should be not less than -25℃.Recommended allowable bending radius:
For non-armored cable should be not less than 6 times outer diameter of the cable;
For armored or copper tape shielded structure cable should be not less than 12 times outer diameter of the cable;
For flexible cable with shielded structure should be not less than 6 times outer diameter of the cable.

Type & Description

Note: The type not listed in the table should be comprised according to following type explanation.

Code & Meaning

Main Technical Index
1. Conductor D.C. resistance at 20℃ complies with stipulations of GB/T3956.
2. Insulation resistance at 20℃ should be not less than 30MΩ .km
3. Cable withstand A.C. 3.5kV for 5 minutes without puncture.

Structure Diagram