Fluoroplastics insulated heat resistant power cable 0.6/1kV
Fluoroplastics insulated heat resistant power cable 0.6/1kV applies for power transmission. High temperature, oil, acid & akali, corrosive gas resistant
Application
This product applies for power transmission of rated voltage up to and including 0.6/lkV, The product has the characteristics of high temperature resistant, oil resistant, acid and alkali resistant, corrosive gas resistant, waterproof and so on. Cable electrical properties arstable at high environment temperatures, has excellent aging resistant property, and long service life. Thus it is widely used in metallurgelectric power, petrochemical, electronics and automobile industry etc.
Executive Standard
Q/WHY 04
Service property
1. The rated voltage U0/U of the cable should be 0.6/1kV.
2. Maximum operating temperature: should be no more than 200℃ for F46 insulation; should be no more than 260℃ for PFAinsulation.
3. Minimum ambient temperature of fuoroplastic and silicon rubber sheath: Should be -60℃ for fixed laying, -15℃ for non fixed laying.
4. Cable laying temperature should be not less than 0℃ (not less than -25℃ for fuoroplastic and silicon sheath).
5. Allowed bending radius of single core cable should be not less than 10 times outer diameter of the cable, of multi-core cable should be not less than 15 times outer diameter of the cable.
Type & Description
| Type | Description |
|---|---|
| FF | Fluoroplastic insulated and sheathed power cable |
| FFR | Fluoroplastic insulated and sheathed flexible power cable |
| FFP | Fluoroplastic insulated and sheathed copper wire braided shielded power cable |
| FFRP | Fluoroplastic insulated and sheathed copper wire braided shielded flexible power cable |
| FV | Fluoroplastic insulated PVC sheathed power cable |
| FV22 | Fluoroplastic insulated steel tape armored PVC sheathed power cable |
| FV32 | Fluoroplastic insulated steel wire armored PVC sheathed power cable |
| FG | Fluoroplastic insulated silicon rubber sheathed power cable |
| FG24 | Fluoroplastic insulated steel tape armored silicon rubber sheathed power cable |
| FG34 | Fluoroplastic insulated steel wire armored silicon rubber sheathed power cable |
Note: The type not listed in the table should be comprised according to following type explanation.
Code & Meaning
| Item | Code | Description |
|---|---|---|
| Series coding | Y | Movable flexible cable |
| Burning characteristic | Z(A/B/C) | Flame retardant grade (A/B/C) |
| N | Fire resistant | |
| Insulation | F | Fluoroplastic insulation |
| Conductor | – | Class 1 and 2 copper conductor |
| R | Class 5 copper conductor | |
| L | Aluminum conductor | |
| Shield | P | Copper wire braided shield |
| P2 | Copper tape wrapped shield | |
| P3 | Aluminum plastic composite tape wrapped shield | |
| Sheath | F | Fluoroplastic sheath |
| V | PVC sheath | |
| G | Silicon rubber sheath | |
| Armor layer | 2 | Steel tape armor |
| 3 | Steel wire armor | |
| 9 | Galvanized steel wire braided armor | |
| Outer sheath | 2 | 105℃ PVC sheath |
| 4 | Silicon rubber sheath |
Main technical index
1. Conductor D.C. resistance at 20℃ complies with stipulations of GB/T3956.
2. Insulation resistance at 20℃ should be not less than 500MΩ .km
3. Cable withstand A.C. 3.5kV for 5 minutes without puncture.
Structure diagram
RELATED PRODUCTS
TUV Photovoltaic Solar Wire Cable PV1-F 2 PfG 1169
This product is suitable for single core soft cables on the DC side of photovoltaic systems with a maximum allowed DC voltage of up to 1.8kV (core-to-core, non-grounded system). Besides, It’s also suitable for use under Class II safety level. Temperature can reach 90℃, and multiple wires can be used in parallel.
GET IN TOUCH
We look forward to serving you! Our team will get back to you promptly.