H1Z2Z2-K EN 50618 PV Photovoltaic Solar Cable

Our photovoltaic (PV) cables can be see in Industrial Automation, Control Systems, Building Wiring, Transportation, Telecommunication, and Renewable Energy. Photovoltaic Systems are commonly used in solar and wind energy installations due to their environmental resilience. We are manufactured according to European Standard EN 50618 and with the harmonized designation H1Z2Z2-K. TUV approved. And this product is suitable for single core soft cables on the DC side of photovoltaic systems with a rated DC voltage of 1.5kV. Besides, it’s also ideal for use with class II equipment. Temperature can reach 90 ℃.

Product Properties

  • Ambient temperature: -40℃~+90 ℃
  • Maximum operating temperature of conductor: 120 ℃
  • The cables’ maximum operating environment temperature can reach 90 ℃.
  • Cables’ rated voltage: AC: U0/U 0.6/1.0kV & DC: 1.5kV
  • Test voltage: AC: 6.5kV/5min, not breakdown & DC: 15kV/5min, not breakdown
  • When laying, the allowed bending radius should be not less than four times the cable diameter.
  • Cables’ halogen-free flame retardant performance complieswith the EN 60332-1-2;
  • Low smoke performance complies with EN 61034-2 regulations, and the minimum light transmittance is not less than 60%.
  • Halogen-free performance complies with EN 50525-1.
  • Cables have excellent extreme weather, UV, and ozone erosion resistance and bear a broader range of temperature changes.

Type & Specification

Cable typeNumber of coresNominal cross-section
H1Z2Z2-K11.5~35
Nominal cross-sectionThickness of insulationThickness of sheathMaximum DC resistance of conductor at 20 ℃Maximum Cable diameterMinimum insulation
resistance at 20 ℃
mm2mmmmΩ/kmmmMΩ.km
1.50.70.813.75.4860
2.50.70.88.215.9690
40.70.85.096.6580
60.70.83.397.4500
100.70.81.958.8420
160.70.91.2410.1340
250.91.00.79512.5340
350.91.10.56514.0290

Cable Structure Diagram

RELATED PRODUCTS